I am assuming you have "C" as your main drive as that drive letter matches the tutorial instuctions.


Place the folder "BSP_tools" in your C:\ drive... 

C:\BSP_tools 

If you do not have the old SIERRA half life installed you will also need to place the "SIERRA" folder under "C"... 

C:\SIERRA.

You are done. Go back to the tutorial, the rest below is fix's if you get an error.

INsane


=============================================================

When it goes all wrong.....

Reason is below and repated in the tutorial.


You may experience some problems with a .cfg file if you do not have the old Half Life installed, typically C:\SIERRA\Half-Life.

You will see this...

************ ERROR ************
Half-Life directory C:\SIERRA\Half-Life doen't exist
Please edit the .cfg file to match your installation


What this tool is looking for is the liblist.gam file in C:\SIERRA\Half-Life.

The fix is to install the correct folders and files above...check!


The drive letter issue....

If your main drive is "C" you do not need to edit the BSP_slicer.cfg, BSP_tool.cfg and BSP_view.cfg  that is if you placed everything in the C drive.

If you use another drive letter adjust the folders and BSP_slicer.cfg, BSP_tool.cfg and BSP_view.cfg to the correct addresses.


INsane.

-------------------------------------------------------------
